Click on image to enlarge All our products are made with conservation grade wood fibre board ranging from 0.45mm in thickness to 2.6mm in thickens where appropriate. We recommend using PVA or wood glue to glue the wood fibre board parts together and cyanoacrylate or resin based glue for 3d printed parts if present. Both enamel and acrylic paints have been tested and can be used. Avoid saturating the material with excessive moisture. If bowing occurs leave to dry and gently bend back to shape. Not suitable for outdoor use.
Price £16.99 + postage and packaging
Sorry temporarily out of stock
Small toolbox made with 3mm birch plywood with hinged lid and a divider in the middle.
We very strongly recommend use of clamps to hold the parts while glue dries
Width: 196mm, Depth: 141mm, Height: 63mm